DELL PCT 6224 (EQL configuration)

1. Enable the RSTP on the switch
2. Enable “spanning-tree portfast” on all ports connected to the SAN
3. Enable Jumbo Frame support on ports connected to the SAN
4. Disable the “storm control” feature on ports connected to the SAN
5. When you have dedicated SAN network enable Flow Control on the switch

Configuration:

Switch(config)# spanning-tree mode rstp
Switch(config)# interface range ethernet 1/g1-1/g12
Switch(config-if)# spanning-tree portfast
Switch(config-if)# mtu 9216
Switch(config-if)# no storm-control unicast
Switch(config-if)# exit
Switch(config)# flowcontrol (only you have dedicated SAN)
Switch# copy running-config startup-config